Posted on

Install RetroPie in your Raspberry Pi and Play your First Retro Game

RetroPie is one of the emulators running on Raspberry Pi that lets you play your favorite childhood games including SNES, NES, Atari, etc. You can install it on top of an existing Raspbian OS or readily install it on your SD card with the RetroPie image.

This tutorial will teach you how to install RetroPie in your SD card for your Raspberry Pi 3.

 

Step 1 – Download the image

Go to:

https://retropie.org.uk/download/

and make sure to download the Raspberry Pi 2/3 version since you are going to install it on your Raspberry Pi 3.

 

Step 2 – Extract the file

After downloading the .gz file, extract the file using your favorite extraction tool. Remember the directory where you extracted the .img file.

 

Step 3 – Burn the image

There are several ways to do this but we recommend that you use Etcher. It is fast and utilizes a simple interface which makes burning images on SD cards a breeze.

Navigate to the extracted .img file and choose the SD card where you want to install RetroPie. Click Flash! and you’re ready for your first RetroPie boot up!

 

Setting up your first game

Now that you’ve already installed RetroPie, it’s time to play some games! First you need to configure your gamepad and install your chosen game ROMs. We don’t endorse piracy, you should only download ROM’s of games that you own.

 

Step 1 – Configure your gamepad controller

Connect your gamepad controller via USB. RetroPie will automatically detect your gamepad.

As the instruction says, hold any button to start configuring your controller.

Step 2 – Transferring ROMs

ROMs or Read Only Memory are the electronic versions of your old game cartridges. There are currently three main methods of transferring your game ROMs – via USB, via SFTP and via Windows Samba Shares.

 

via USB
  1. make sure your USB is formatted to FAT32
  2. create a retropie folder in your flash drive
  3. plug into your Raspberry Pi 3 and wait for about 10 seconds and plug it out
  4. plug your flash drive again to your computer and you’ll see that the retropie folder has been populated by 3 subfolders. Copy your ROMs in your into the roms/$CONSOLE subsubfolder. (e.g. put your Super Mario World game ROM in roms/snes)
  5. plug into your Raspberry Pi 3 again and wait for about another 10 seconds
  6. choose quit from the start menu
via SFTP
  1. Connect your Raspberry Pi 3 to your WiFi. Follow this guide if you are having trouble connecting.
  2. Download WinSCP for Windows or Cyberduck for Mac. Follow these connection settings:

* Protocol: SFTP
* IP Address: you RetroPie’s IP address, if you’re having trouble finding your IP Address, follow this guide here
* Username: pi
* Password: raspberry
3. Drop the files in ~RetroPie/roms/$CONSOLE folder where $CONSOLE is the corresponding console the ROM should be played.

via Samba Shares
  1. You can access Samba Shares depending on your OS

* On Windows, type \\RETROPIE in your computer folder
* On Mac, open finder, select “Go”, and then “Connect to Server”, input smb://retropie and hit “Connect”.
2. Drop the files in ~RetroPie/roms/$CONSOLE folder where $CONSOLE is the corresponding console the ROM should be played.

Step 3 – Play!

You will see something like this, depending on your transferred ROM.

Choose your game and enjoy!

2 thoughts on “Install RetroPie in your Raspberry Pi and Play your First Retro Game

  1. It is possible to use the cooling fan with this case?
    Thank you

    1. There is still enough space for you to place a cooling fan inside. You can get power via the GPIO pins of the Raspberry pi.

Leave a Reply

Your email address will not be published. Required fields are marked *